zinc oxide rotary kiln equipment Adaptable motor, reducer, transmission device

Introduction to zinc oxide rotary kiln equipment

Introduction to zinc oxide:

Zinc oxide is a white or slightly yellow fine powder, and its Chinese name is zinc oxide. Also known as zinc white; zinc oxide powder. It is easily dispersed in rubber and latex. It is a reinforcing agent, activator and vulcanizer for natural rubber and synthetic rubber, and is also a colorant and filler for white rubber.

Introduction to zinc oxide rotary kiln:

The zinc oxide rotary kiln crushes zinc furnace charge and coking coal into particles smaller than 40 mesh, mixes zinc furnace charge and coking coal in a ratio of 1:0.30-0.35 to obtain a mixture, and then makes the mixture into a granular mixture with an effective diameter of 8-15 mm, and finally puts the granular mixture into a rotary kiln for smelting. When it is used to smelt zinc oxide from zinc oxide ore or zinc-containing industrial slag with a zinc content of 15%-25% to produce zinc oxide, it has the advantages of greatly saving coke or coal; the product quality obtained by smelting is good, and the productivity is improved with a small amount of nodules.

Performance characteristics of zinc oxide rotary kiln

A. Adopt the most advanced hydraulic wheel blocking device at home and abroad.

B. Adopt the metering plunger pump with high metering accuracy.

C. Domestic advanced technologies such as high-precision speed regulating valve and contact graphite block sealing device.

D. Easy to operate and reliable to use.

E. Stabilize the thermal system and improve the equipment operation rate.

F. Compared with the equipment of the same specification, the operation rate is increased by 10%, the output is increased by 5%-10%, and the heat consumption is reduced by 15%.